Aluminum veneer is composed of panel, reinforcement and corner code and other accessories, weather resistance, corrosion resistance is good, the surface is easy to choose a variety of coatings. Its brand alloy according to the beauty, grid, strength requirements can choose 1 series, 3 series and 5 series plates; Its thickness can be selected according to the function, use position, technical needs, such as 1.5mm, 2.0mm, 2.5mm, 3.0mm.
In the selection process: pay attention to the following aspects:
(1) Select the aluminum plate grade according to the strength requirements, for example, the thickness of the plate is thin, the weight is light, but the strength is good, then you can choose 5 series.
(2) Select the thickness according to the grid and strength requirements, in order to achieve economic applicability, in the case of being able to meet the technical requirements, the appropriate choice will effectively reduce the procurement cost. For example, in the interior lobby decoration, the general wall panels are required to meet the requirements of people to lean on and knock without noise, and 3.0 thick aluminum panels can be selected, so the parts that people can not reach can choose relatively thin thickness.
(3) The unevenness of the substrate has a certain deviation in the production of aluminum plates, and the unevenness will be increased in the processing process, and the especially harsh requirements can not be achieved.
(4) Now the thickness of aluminum plate produced by aluminum factory can be customized according to the requirements of the order, it is recommended to lock the specific thickness, such as 3.0 thick aluminum plate, direct lock bare material between 2.85-2.87, or low 2.85, to facilitate the reasonable procurement cost.
